Robin Hartl
Kitchen Cabinet Rollout Drawer
Materials List:

1/2" Plywood
3/4" finished poplar or similar
1" finish nails
Full Extension Drawer Glide

Front and Back: 3-3/4" h x your cabinet opening width

Sides: 3-3/4"h x depth of your cabinet

Bottom: your cabinet width by your cabinet depth

Once the drawer is cut, glued and nailed together, separate the two parts of the drawer slide. Align the drawer section to the bottom of the drawer and make sure it is straight. Align the cabinet section to the cabinet floor and make sure it is straight. Secure both sections.
Tools Needed:

Brad Nailer

Tape Measure

Circular Saw

Cordless Drill/Driver

Wood Glue